Bamboos and boxes

Provide the base support for the chanter

So when I started to learn to play the bagpipes, the first thing I had to purchase was a practice chanter. The full set of bagpipes uses a hide or synthetic bag to provide a steady flow of air through the chanter and the drones. The drones are the three pipes that rest on the pipers shoulder and they just make different bass notes to support the chanter. IMG_0505The chanter itself though is the pipe with finger holes in it that makes the notes of the tune. Here is a photo of yours truly taken by my bagpipe teacher when I went for a lesson with my new Chanter reedpipes. There is a reed in the chanter that vibrates when a stream of air from the bag passes over and through it. But here’s the thing. A bagpipe chanter makes a heck of a loud sound (so,me would say noise), and so do the drones. If you practiced playing them in your apartment, some neighbour would sooner or later shoot you. So in modern times, the practice chanter was developed. It is similar to the actual chanter, but the reed is made of plastic and is relatively un-noisy. There is no bag so the air to sound the practice chanter is provided directly by the player blowing down a blow stick which is connected directly to the practice chanter.

So having set the scene, let’s get back to the title of this blog article, i.e. ‘Bamboos and boxes’.

Chanter quiver comp
Chanter quiver

Any musical instrument should be protected for transportation and since I had some bamboo lying around, I sawed off a length and used it to make a carrying case for my practice chanter. The cap and strap are made of leather. I thought it was quite arty looking and would be a convenient way of carrying the chanter around. Here is a picture of what I called ‘The Quiver’. It worked O.K. but it is quite a long and bulky object and I realised after a while that it was not very practical. So I made a container of a different design for the chanter. It is a little foam lined, hinged box with cutouts in the foam to cushion the chanter.

To transport the chanter in this box, one unplugs the blowstick from the lower part and stows them side by side. The reed has to be removed too because it would be too vulnerable if it was left protruding from the playing tube. The reed and also a couple of spare reeds get popped into a small plastic pill box with a desiccant to keep the reeds moisture free. Piper 2 nealPractice chanter reeds are made of plastic and don’t work well when wet. Real chanter reeds are made of special Indian reed and they have to be moist if they are to be coaxed into making any sounds at all.


Somewhere, sometime in history someone realized that if you tie the flat surfaces of two thin bits of reed together, put these blades between your lips, and blow, the reeds will vibrate and make a squawking sound.

At school we did the same thing with tissue paper over a comb. This principal was later embodied in many musical instruments to provide them with a voice. Clarinets and the like use just one flappy reed against a fixed lip-piece and other instruments use two flaps of reed which vibrate against each other. But the bagpipes are rather special. With other instruments you have to stop the music periodically to allow the musician to take a quick breath so he can go on playing without expiring. The bagpipes have a lung of their own. The bag is just that. It is an external lung which the player props in under his arm and squeezes steadily to provide the airflow needed to maintain the tune even whilst the music maker is taking in fresh air. He then blows more air into the bag through his blowpipe to keep it inflated. This is tricky to do in practice but when perfected it works very well. Actually, they discovered that it works so well that they could attach three more reeded pipes to the bag and get them all to sing in harmony. The piper can of course only play one tune at a time. So the reed instrument taht is being given voice by air from the bag, has a number of holes down its length to enable the piper to play different notes. This tube is called the chanter. The other three reeded pipes each simply sound off on a single monotonous note. They are called drones for obvious reasons. Two of them are tenor drones and they each produce a monotone which is exactly an octave below the ‘low-A’ note of the chanter. The third and longer, bass drone produces a note that is yet another octave lower. For those not musically informed, two notes an octave apart will be in perfect harmony. For each flap of the reed in the lower tuned pipe, the reed in the shorter pipe will flap twice. The combined tone we then hear is acoustically interesting because we can hear that the two notes are very different but the combination pleases us because they beat in time with each other. To understand a similar thing in the visual world, imagine the following. Two soldiers march side by side. ThePiper 2 nealy move forward at the same speed but one takes two short paces for each long pace that the other takes. Their movements are patently different but they are clearly still in step. They can be said to be synchronized, or in harmony.  More on bagpipes at another time.